APRILIA
1993 - 1997 APRILIA RS 125 REPLICA

RS 125 REPLICA (1993 - 1997)

Exact year: Choose | VIN: please enter

Aprilia RS 125 Replica (1993–1997): A Two-Stroke Legend Revisited

Introduction: The Pocket Rocket with Grand Prix DNA

When Aprilia unleashed the RS 125 Replica in 1993, it wasn’t just building a motorcycle—it was bottling the adrenaline of Grand Prix racing for the streets. This wasn’t merely a bike; it was a statement. A 125cc two-stroke screamer wrapped in livery honoring legends like Loris Reggiani and Max Biaggi, the RS 125 Replica blurred the line between race track and public road. For riders in the mid-’90s, this was the closest you could get to MotoGP glory without a factory contract.

Decades later, the RS 125 Replica remains a cult classic. Its razor-sharp handling, ear-splitting exhaust note, and race-bred aesthetics still turn heads. But what’s it like to ride one today? Let’s twist the throttle and find out.


Riding Experience: The Thrill of Riding on the Pipe

The Two-Stroke Scream

Slip into the narrow, race-tucked seat, kick up the sidestand, and thumb the starter. The liquid-cooled Rotax engine barks to life with a metallic snarl that’s pure two-stroke theatre. At idle, it’s docile, almost polite. But crack the throttle, and the Dell’Orto carburetor gulps air, transforming the RS 125 into a caffeine-addicted terrier.

Power builds linearly until 8,000 RPM, then—bam—the powervalve opens. The 34 hp (25 kW) single-cylinder engine screams to its 11,000 RPM redline, shoving you forward with a surge that feels twice its displacement. Keep it “on the pipe,” and the RS 125 rockets to 171 km/h (106 mph), a staggering figure for a 125cc machine. The standing quarter-mile in 14.3 seconds? That’s faster than many 250cc four-strokes of its era.

Handling: Carving Corners Like a Scalpel

Weighing just 115 kg (254 lbs) dry, the RS 125 feels like a bicycle with a jet engine. The aluminum perimeter frame and 40mm upside-down forks—exotic tech in the ’90s—deliver telepathic steering. Flick it into a hairpin, and the bike dives in with zero hesitation. The 17-inch wheels (110/70 front, 150/60 rear) offer grip that defies their skinny dimensions.

On twisty backroads, the RS 125 shines. You’re not just riding; you’re conducting. Every input—countersteering, throttle modulation, braking—feels amplified. The single 320mm front brake (a four-piston caliper!) sheds speed with surgical precision, hauling you down from 100 km/h (62 mph) in 37.9 meters (124 feet).

The Catch? It Demands Commitment

This isn’t a commuter. The riding position is pure race-replica: clip-ons low, rearsets high, and a seat that’s best described as “minimalist.” Fuel economy? Expect 5.1 L/100 km (45.9 US mpg) if you’re gentle—but who’s gentle on a two-stroke? The 11.5-liter (3.0-gallon) tank means frequent stops, but every fill-up is a chance to relive the adrenaline.


Design & Features: A GP Bike for the Masses

Aesthetics That Aged Like Fine Wine

The RS 125 Replica’s design is timeless. The full fairing mirrors Aprilia’s ’90s GP bikes, with twin headlights peering through a narrow slit. The Chesterfield and Loris Reggiani liveries—bold blocks of red, white, and black—still look race-ready. Even the mirrors, often an afterthought on sportbikes, integrate seamlessly into the fairing.

Chassis Innovation

Beneath the skin, Aprilia went all-out. The aluminum frame was a revelation in lightweight construction, paired with a box-section swingarm (later models ditched the AF1’s single-sided unit for improved rigidity). Adjustable monoshock suspension? Check. Upside-down forks when most competitors used spindly right-side-up units? Checkmate.

Quirks and Features

  • Liquid Cooling: Rare for 125s in the ’90s, it kept temps stable during prolonged abuse.
  • Ceramic Cylinder Coating: Reduced friction for better power delivery (and a distinctive engine note).
  • Six-Speed Gearbox: Allowed riders to stay in the powerband, crucial for a peaky two-stroke.

Competition: How the RS 125 Stacks Up

Honda NSR125: The Conservative Challenger

Honda’s NSR125 shared the RS 125’s two-stroke heart but played it safe. With 28 hp (21 kW) and conventional forks, it was softer, friendlier, and slower (top speed: 158 km/h / 98 mph). The NSR’s steel frame added weight, but Honda’s reliability was legendary. For riders prioritizing practicality over passion, the NSR made sense. The RS 125? It was for the obsessed.

Yamaha TZR125: The Dark Horse

Yamaha’s TZR125 split the difference. Its 129cc engine (technically a 125 in some markets) delivered 30 hp (22 kW) and a broader powerband. The delta-box frame handled well, but Yamaha skimped on suspension—basic forks and a non-adjustable shock. The TZR was quick but lacked the Aprilia’s track-ready edge.

Why the RS 125 Reigns Supreme

The Aprilia’s blend of GP-derived tech and uncompromising focus made it the king of the 125cc sportbikes. While rivals prioritized usability, the RS 125 screamed, “This is what racing feels like.” Even today, it’s the benchmark for raw, unfiltered performance.


Maintenance: Keeping the Legend Alive

Engine Care: Treat It Like a Race Motor

  • Oil: Use Motul 800 Factory Line or equivalent fully synthetic two-stroke oil. Cheap oil = seized pistons.
  • Pistons: Replace every 5,000 km (3,100 miles). Genuine Aprilia pistons are pricey; aftermarket options (e.g., Athena, Vertex) work well.
  • Main Bearings: Listen for growling noises at idle. Failure here often means a full rebuild.

Critical Upgrades

  • Carburetor Tuning: The stock Dell’Orto VHSB 34LD carb is finicky. A rebuild kit (jets, gaskets) ensures crisp throttle response.
  • Cooling System: Replace coolant annually. Consider a high-performance radiator cap for track days.
  • Suspension: Stock springs are soft for aggressive riders. Upgrade to Hyperpro or Öhlins for adjustability.

Buyer Beware: Common Issues

  • Rotax Engine Confusion: Models from 1993–1995 use the Rotax 123 engine; 1996–1997 bikes use the 122. Verify with VIN decoders.
  • Bodged Mods: Many RS 125s were “de-restricted” by amateurs. Check for proper powervalve operation and carb jetting.
  • Electrics: Stators and CDI units fail with age. Keep spares on hand.

Conclusion: A Timeless Addiction

The Aprilia RS 125 Replica isn’t a motorcycle—it’s an affliction. It’s the itch to rev higher, lean harder, and chase that two-stroke crescendo. Yes, it’s demanding. Yes, it’ll bankrupt you in premix oil. But where else can you own a slice of ’90s GP history for the price of a used scooter?

For riders today, the RS 125 offers a purity modern bikes can’t match. No rider aids, no emissions gear—just you, a screaming Rotax, and a chassis that’s begging to be thrashed. At MOTOPARTS.store, we’re here to keep your Replica ripping. From pistons to fairing bolts, we’ve got the guts to feed the beast.

Now, go dig out your leathers. That RS 125 isn’t going to ride itself.




Specifications sheet

Silnik
Udar: Two-stroke
Zapłon: Electronic
Maksymalna moc: 25 kW | 34.0 hp
Maksymalny moment obrotowy: 25 Nm
Układ paliwowy: Dell'Orto VHSB 34LD carburetor
Smarowanie: 2-stroke oil injection
Maksymalna moc @: 11000 rpm
Wyporność: 125 ccm
Maksymalny moment obrotowy @: 9000 rpm
Konfiguracja: Single
Układ chłodzenia: Liquid cooled
Stopień sprężania: 14.5:1
Liczba cylindrów: 1
Wymiary
Waga w stanie suchym: 115
Masa na mokro: 142
Pojemność zbiornika paliwa: 13.0 L (3.4 US gal)
Układ napędowy
Napęd końcowy: chain
Długość łańcucha: 108
Skrzynia biegów: 6-speed
Tylna zębatka: 39
Przednia zębatka: 17
Konserwacja
Tylna opona: 150/60-17
Opona przednia: 110/70-17
Płyn hamulcowy: DOT 4
Olej przekładniowy: 10W-40
Świece zapłonowe: NGK BR10EG or NGK BR8ES (15 PS model)
Olej do silników 2-suwowych: Fully synthetic (e.g., Motul 800 Factory Line)
Pojemność płynu chłodzącego: 0.8
Pojemność oleju widelca: 0.9
Okres między przeglądami tłoków: Every 8,000 km (5,000 mi)
Częstotliwość wymiany oleju w skrzyni biegów: Every 5,000 km or 2 years
Zalecane ciśnienie w oponach (tył): 2.0 bar (29 psi) solo, 2.3 bar (33 psi) with passenger
Zalecane ciśnienie w oponach (przód): 1.8 bar (26 psi)
Podwozie i zawieszenie
Rama: Aluminum perimeter beam
Hamulce tylne: Single 240 mm disc, 2-piston caliper
Hamulce przednie: Single 320 mm disc, 4-piston caliper
Tylne zawieszenie: Monoshock, 120 mm travel
Przednie zawieszenie: 40mm upside-down forks, 120 mm travel






Popular Shelves

Our Offers

Popular Products